9,000 lb. capacity Symmetric lifts. These lifts have the heavy-duty leaf chain, the steel pulleys, the high-strength cable equalization system and everything you'd expect from a quality lift.

This is a powerful, quality lift with convenient Symmetric design and a price tag to satisfy any budget. It utilizes dual cylinders with low friction chain rollers to lift your ride in less than a minute. If you need to hoist your car at home or in your shop, this lift is one of our most popular solutions.

Features and Specifications:

9,000 lb. Floor Plate lift ~ Symmetric design

# Symmetrical: all 4 arms on the lift are straight and the same length. The vehicle will sit evenly between the columns. This design is highly recommended because it balances the weight more evenly and on a floor plate lift makes it safer. It is easier to correctly load the vehicle on the lift.

Dual cylinders with low friction chain rollers
Low profile automatic arm restraints
1 1/2" and 5" stackable drop-in height adapters
powder coated paint finish
Free mounting hardware included with lift
Dual Point Safety Release
Large 18" x 13" base plates

Capacity: 9,000 lbs.
Lifting speed: 50 seconds
Motor rating: 2HP 220 vac
Amperage: 30 amps.
Pad height adjustment: 4" - 10"
Lifting height with adapters: 78"
Width overall: 134"
Height overall" 111.5"
Drive through Width: 102"
Width between posts: 109"
Concrete requirements 4" thick 3000PSI (must be reinforced concrete)


**the floor plate has a height of 1.5" from ground to the middle**

The 9,000 LB 2 post lifts are not designed to be used to pick up full size or larger, extended cab or quad cab trucks or sport utility vehicles. This is not due to the lifting capacity; it is due to the location of the pick up points. The fuel tanks on these trucks are situated so that the adapters are unable to grab the vehicle correctly, causing the arm to be placed too far forward. The vehicle is then unbalanced causing the arm to kick out, which could then cause a lift failure and/or a possible safety hazard. Many of our customers have used these lifts without incident; however these are placed in businesses with experienced, qualified technicians. Again, it is the placement of the arms on these vehicles that creates the issue, not the capacity of the lift.

To lift a half ton, extended wheel base vehicle with the TP9K series you may do so with the symmetric arms on the lift ~ The FLOOR PLATE lift comes standard with Symmetric arms. If the customer requires a versatile lift to be used across the board to pick up cars, trucks and sport utility vehicles with extended wheel bases the 11,000 LB 2 post direct drive (P2P11KD) lift would be the best overall lift for this application.

The arm restraints that come on our two post lifts are for the purpose of holding the arm in place until it makes contact with the vehicle. They are not to be relied upon to hold a miss positioned vehicle in place.

Panther Lifts, nor its distributors, will be responsible for accidents that occur on lifts where the vehicle was not properly positioned, or the proper adapters or arms were not used.

**THIS LIFT IS TOO HEAVY FOR LIFT GATE DELIVERY. CUSTOMER WILL BE RESPONSIBLE FOR OFF LOADING FROM THE DELIVERY TRUCK**

Safety is everyone�s job. Let�s do our job together.Please refer to the �Lifting It Right� guide published by the A.L.I (Automotive Lift Institute). This guide may be ordered off their web site: www.autolift.org. This is an excellent source of information and is sold at a very reasonable price to non-members.